RMX-22i

€269
DJ Mag
djay pro

fitting furniture:

Technical Data

  • Inputs: 2 Phono, 5 Line, 1 Combo-Mic
  • Outputs: 1 XLR, 2 RCA, 2 headphones
  • Frequency range: 20 Hz - 20 kHz
  • EQ range classic: +12 dB / -8 dB
  • EQ range isolator: +12 dB / -26 dB (Total Kill)
  • Dimensions: 254 x 104 x 355 mm
  • Weight: 3,7 kg

Features

  • 2 (+1) Channel Digital Effect Mixer
  • Fully digital architecture for outstanding sound and flexibility
  • 4 Instant Sound Colour Effects per channel (Filter, White Noise, Bit Crush & Gate)
  • iPad / tablet / smartphone audio split-input
  • EQ-setting for classic or isolator (kill)
  • 45 mm club line- & crossfader
  • Fader-start, reverse & curve control
  • Innofader compatible
  • Mic channel with 2-band EQ and auto talkover (active ducking technology)
  • 2 headphones outputs (6,3 mm jack and 3,5 mm jack)
  • Balanced (XLR) and unbalanced (RCA) outputs
  • Altogether 8 inputs (2x phono, 5x line, 1x combo-mic)
  • Altogether 5 outputs (1x XLR, 2x RCA, 2x headphones)
  • Club quality sound & built
  • Optional Reloop RMX Innofader accessory by Audio Innovate available
  • incl. Smartphone / Tablet Audio Split Cable and International Power Supply
Rock solid, well specced, effects and scratch-worthy makes them a sound purchase. [...] the RMXs are excellent mixers at an excellent price.

Media

Images

 

Reloop RMX-22i

Hardware Explorer

Move your mouse over the buttons to see their function!
<h1>Booth output</h1><p>Adjust the booth output's volume level.</p> <h1>Master section</h1><p>By using the Master Dial you can adjust the master output volume. Make sure that the Master Signal's LED is only visible in the yellow range.</p> <h1>Monitoring</h1><p>Select the channels that you wish to monitor via your headphones. With Cue Mix you can fade between the channels and the master signal. </p> <h1>Monitoring</h1><p>Select the channels that you wish to monitor via your headphones. With Cue Mix you can fade between the channels and the master signal. </p> <h1>Monitoring</h1><p>Select the channels that you wish to monitor via your headphones. With Cue Mix you can fade between the channels and the master signal. </p> <h1>Flexible fader section</h1><p>The line- and cross-fader curves are adjustable on the mixer surface. The cross-fader can be set to crossover-reverse.</p> <h1>Flexible fader section</h1><p>The line- and cross-fader curves are adjustable on the mixer surface. The cross-fader can be set to crossover-reverse.</p> <h1>Flexible fader section</h1><p>The line- and cross-fader curves are adjustable on the mixer surface. The cross-fader can be set to crossover-reverse.</p> <h1>Flexible fader section</h1><p>The line- and cross-fader curves are adjustable on the mixer surface. The cross-fader can be set to crossover-reverse.</p> <h1>Flexible fader section</h1><p>The line- and cross-fader curves are adjustable on the mixer surface. The cross-fader can be set to crossover-reverse.</p> <h1>Instant sound colour effects</h1><p>The mixer has four high-quality digital Sound Colour effects built-in. White noise, Filter (low and high-pass), Bit Crusher and Gate can be assigned to the dedicated Instant FX potentiometers at the push of a button. The effects can be used for any channel and are modulated via a large, ergonomic bi-polar potentiometer to achieve exactly the sound you want.</p> <h1>2- Band-Equalizer </h1><p>Via the 2-Band Equalizer you can adjust low and high frequencies.</p> <h1>3-Band-Equalizer</h1><p>The mixer has a three-band EQ section that can be easily set to 'Kill' (isolator mode) or 'Classic'. </p> <h1>3-Band-Equalizer</h1><p>The mixer has a three-band EQ section that can be easily set to 'Kill' (isolator mode) or 'Classic'. </p> <h1>3-Band-Equalizer</h1><p>The mixer has a three-band EQ section that can be easily set to 'Kill' (isolator mode) or 'Classic'. </p> <h1>Gain Channel Mic/Aux</h1><p>Adjust the input volume for channel Mic/Aux. Make sure that the Peak LED is only illuminated during peak highs.</p> <h1>Gain Channel 1 & 2</h1><p>Adjust the input volume for channel 1 and 2. Make sure that peak signals remain within the yellow range of the LED indicator.</p> <h1>Master section</h1><p>By using the Master Dial you can adjust the master output volume. Make sure that the Master Signal's LED is only visible in the yellow range.</p> <h1>Gain Channel 1 & 2</h1><p>Adjust the input volume for channel 1 and 2. Make sure that peak signals remain within the yellow range of the LED indicator.</p> <h1>Gain Channel 1 & 2</h1><p>Adjust the input volume for channel 1 and 2. Make sure that peak signals remain within the yellow range of the LED indicator.</p> <h1>Gain Channel 1 & 2</h1><p>Adjust the input volume for channel 1 and 2. Make sure that peak signals remain within the yellow range of the LED indicator.</p> <h1>Signal Input Channel Mic/Aux</h1><p>Select between Mic, Aux or iPad (Stereo).</p> <h1>Signal Input Channel</h1><p>Select between Phono, CD or iPad (channel 1 & 2).</p> <h1>Signal Input Channel</h1><p>Select between Phono, CD or iPad (channel 1 & 2).</p> <h1>Fader-Start Switch / Crossfader-Start Switch</h1><p>If you have connected appropriate CD players to the RMX-22i, you can trigger these via the Crossfader or Linefader, respectively. To do so, activate the Fader-Start Switch or the Crossfader-Start Switch, respectively.</p> <h1>Monitor Output</h1><p>Connect your monitoring system to Booth Out.</p> <h1>Fader-Start</h1><p>Connect the fader-start cables of your CD player to the Fader-Start Connection.</p> <h1>Fader-Start</h1><p>Connect the fader-start cables of your CD player to the Fader-Start Connection.</p> <h1>GND</h1><p>Connect your grounding cable of your turntables to the GND grounding screws.</p> <h1>GND</h1><p>Connect your grounding cable of your turntables to the GND grounding screws.</p> <h1>Phono Signals</h1><p>Connect your phono sources to the corresponding phono channel inputs of channels 1 and 2.</p> <h1>Phono Signals</h1><p>Connect your phono sources to the corresponding phono channel inputs of channels 1 and 2.</p> <h1>iPad Split Connection</h1><p>It is possible to connect your iPad or Android tablet for audio transmission via a 3.5 mm jack connection. To do so, connect the included iPad Split Cable by connecting the black plug side to your tablet or smartphone and connect the red/white plug side to the iPad Split Connection. (White= iPad(l) / Red = iPad(r))</p> <h1>iPad Split Connection</h1><p>It is possible to connect your iPad or Android tablet for audio transmission via a 3.5 mm jack connection. To do so, connect the included iPad Split Cable by connecting the black plug side to your tablet or smartphone and connect the red/white plug side to the iPad Split Connection. (White= iPad(l) / Red = iPad(r))</p> <h1>Master Out Balanced</h1><p>Connect your System to Master Out Balanced (XLR)</p> <h1>Master Out RCA</h1><p>Connect your System to Master Out (RCA)</p> <h1>Power Connection</h1><p>DC5V, 3A</p> <h1>ON/OFF Switch</h1>

Partners