RMX-33i

€329
  • iPad / Tablet / Smartphone Audio Split-Eingang

  • 50% Voucher-Code für Djay Pro von Algoriddim

  • 4 Instant-Sound Colour-Effekte je Kanal (Filter, White Noise, Bit Crush & Gate)

djay pro

fitting furniture:

Technical Data

  • Eingänge: 2 Phono, 7 Line, 1 Kombo-Mic
  • Ausgänge: 1x XLR, 2x RCA, 2x Kopfhörer
  • Frequenzgang: 20 Hz - 20 kHz
  • EQ Range klassisch: +12 dB / -8 dB
  • EQ Range Isolator: +12 dB / -26 dB (Total Kill)
  • Maße: 254 x 104 x 355 mm
  • Gewicht: 3,8 kg

Features

  • 3 (+1) Kanal Digitaler Effektmixer
  • komplett digitale Architektur für überragenden Klang und Flexibilität
  • 4 Instant-Sound Colour-Effekte je Kanal (Filter, White Noise, Bit Crush & Gate)
  • iPad / Tablet / Smartphone Audio Split-Eingang
  • EQ-Einstellung für Classic- oder Isolator-Modus (Kill)
  • 45 mm Club Line & Crossfader
  • Fader Start-, Reverse- & Curve-Kontrolle
  • INNOFADER Kompatibel
  • Mic Channel mit 2-Band-EQ und Auto-Talkover (Active Ducking Technologie)
  • 2 Kopfhörer-Ausgänge (6,3 mm Klinke und 3,5 mm Miniklinke)
  • symmetrische (XLR) wie asymmetrische (Cinch) Ausgänge
  • Insgesamt 10 Eingänge (2x Phono, 7x Line, 1x Kombo-Mic)
  • Insgesamt 5 Ausgänge (1x XLR, 2x RCA, 2x Kopfhörer)
  • Klang & Verarbeitung in Clubqualität
  • OPTIONAL: Reloop 'RMX INNOFADER by Audio Innovate' als Zubehör erhältlich
  • inkl. Smartphone / Tablet Audio-Split-Kabel sowie Universal-Netzteil
  • inkl. 50 Prozent Voucher-Code für Djay Pro von Algoriddim
Rock solid, well specced, effects and scratch-worthy makes them a sound purchase. [...] the RMXs are excellent mixers at an excellent price.

Media

Bilder

 

Reloop RMX-33i

Hardware Explorer

Move your mouse over the buttons to see their function!
<h1>Booth output</h1><p>Adjust the booth output's volume level.</p> <h1>Master section</h1><p>By using the Master Dial you can adjust the master output volume. Make sure that the Master Signal's LED is only visible in the yellow range.</p> <h1>Monitoring</h1><p>Select the channels that you wish to monitor via your headphones. With Cue Mix you can fade between the channels and the master signal. </p> <h1>Monitoring'</h1><p>Select the channels that you wish to monitor via your headphones. With Cue Mix you can fade between the channels and the master signal. </p> <h1>Monitoring</h1><p>Select the channels that you wish to monitor via your headphones. With Cue Mix you can fade between the channels and the master signal. </p> <h1>Monitoring</h1><p>Select the channels that you wish to monitor via your headphones. With Cue Mix you can fade between the channels and the master signal. </p> <h1>Flexible fader section</h1><p>The line- and cross-fader curves are adjustable on the mixer surface. The cross-fader can be set to crossover-reverse.</p> <h1>Flexible fader section</h1><p>The line- and cross-fader curves are adjustable on the mixer surface. The cross-fader can be set to crossover-reverse.</p> <h1>Flexible fader section</h1><p>The line- and cross-fader curves are adjustable on the mixer surface. The cross-fader can be set to crossover-reverse.</p> <h1>Flexible fader section</h1><p>The line- and cross-fader curves are adjustable on the mixer surface. The cross-fader can be set to crossover-reverse.</p> <h1>Flexible fader section</h1><p>The line- and cross-fader curves are adjustable on the mixer surface. The cross-fader can be set to crossover-reverse.</p> <h1>Instant sound colour effects</h1><p>The mixer has four high-quality digital Sound Colour effects built-in. White noise, Filter (low and high-pass), Bit Crusher and Gate can be assigned to the dedicated Instant FX potentiometers at the push of a button. The effects can be used for any channel and are modulated via a large, ergonomic bi-polar potentiometer to achieve exactly the sound you want.</p> <h1>2- Band-Equalizer </h1><p>Via the 2-Band Equalizer you can adjust low and high frequencies.</p> <h1>3-Band-Equalizer</h1><p>The mixer has a three-band EQ section that can be easily set to 'Kill' (isolator mode) or 'Classic'. </p> <h1>3-Band-Equalizer</h1><p>The mixer has a three-band EQ section that can be easily set to 'Kill' (isolator mode) or 'Classic'. </p> <h1>3-Band-Equalizer</h1><p>The mixer has a three-band EQ section that can be easily set to 'Kill' (isolator mode) or 'Classic'. </p> <h1>3-Band-Equalizer</h1><p>The mixer has a three-band EQ section that can be easily set to 'Kill' (isolator mode) or 'Classic'. </p> <h1>Gain Channel Mic/Aux</h1><p>Adjust the input volume for channel Mic/Aux. Make sure that the Peak LED is only illuminated during peak highs.</p> <h1>Gain Channel 3</h1><p>Adjust the input volume for channel 3.</p> <h1>Gain Channel 1 & 2</h1><p>Adjust the input volume for channel 1 and 2. Make sure that peak signals remain within the yellow range of the LED indicator.</p> <h1>Master section</h1><p>By using the Master Dial you can adjust the master output volume. Make sure that the Master Signal's LED is only visible in the yellow range.</p> <h1>Gain Channel 1 & 2</h1><p>Adjust the input volume for channel 1 and 2. Make sure that peak signals remain within the yellow range of the LED indicator.</p> <h1>Gain Channel 1 & 2</h1><p>Adjust the input volume for channel 1 and 2. Make sure that peak signals remain within the yellow range of the LED indicator.</p> <h1>Gain Channel 1 & 2</h1><p>Adjust the input volume for channel 1 and 2. Make sure that peak signals remain within the yellow range of the LED indicator.</p> <h1>Signal Input Channel Mic/Aux</h1><p>Select between Mic, Aux or iPad (Stereo).</p> <h1>Signal Input Channel 3</h1><p>Select between Line or CD.</p> <h1>Signal Input Channel</h1><p>Select between Phono, CD or iPad (channel 1 & 2).</p> <h1>Signal Input Channel</h1><p>Select between Phono, CD or iPad (channel 1 & 2).</p> <h1>Fader-Start Switch / Crossfader-Start Switch</h1><p>If you have connected appropriate CD players to the RMX-22i, you can trigger these via the Crossfader or Linefader, respectively. To do so, activate the Fader-Start Switch or the Crossfader-Start Switch, respectively.</p> <h1>Monitor Output</h1><p>Connect your monitoring system to Booth Out.</p> <h1>Fader-Start</h1><p>Connect the fader-start cables of your CD player to the Fader-Start Connection.</p> <h1>Fader-Start</h1><p>Connect the fader-start cables of your CD player to the Fader-Start Connection.</p> <h1>GND</h1><p>Connect your grounding cable of your turntables to the GND grounding screws.</p> <h1>GND</h1><p>Connect your grounding cable of your turntables to the GND grounding screws.</p> <h1>Phono Signals</h1><p>Connect your phono sources to the corresponding phono channel inputs of channels 1 and 2.</p> <h1>CD/Line Signals</h1><p>Connect your line sources to the corresponding line channel inputs of channel 3.</p> <h1>Phono Signals</h1><p>Connect your phono sources to the corresponding phono channel inputs of channels 1 and 2.</p> <h1>iPad Split Connection</h1><p>It is possible to connect your iPad or Android tablet for audio transmission via a 3.5 mm jack connection. To do so, connect the included iPad Split Cable by connecting the black plug side to your tablet or smartphone and connect the red/white plug side to the iPad Split Connection. (White= iPad(l) / Red = iPad(r))</p> <h1>Fader-Start</h1><p>Connect the fader-start cables of your CD player to the Fader-Start Connection.</p> <h1>iPad Split Connection</h1><p>It is possible to connect your iPad or Android tablet for audio transmission via a 3.5 mm jack connection. To do so, connect the included iPad Split Cable by connecting the black plug side to your tablet or smartphone and connect the red/white plug side to the iPad Split Connection. (White= iPad(l) / Red = iPad(r))</p> <h1>Master Out Balanced</h1><p>Connect your System to Master Out Balanced (XLR)</p> <h1>Master Out RCA</h1><p>Connect your System to Master Out (RCA)</p> <h1>Power Connection</h1><p>DC5V, 3A</p> <h1>ON/OFF Switch</h1>

Partners